Metal Hole Punch Machine J23 25T

Metal hole punch machine is a modern machine for punching and embossing sheet metal. Compared with traditional machinery, it has higher efficiency, and lower technical requirements for the operator. It is an indispensable part of the production, as well as the press brake and shearing machine.

Principle of sheet mechanical power press

The principle of the power press is to convert the circular motion into a linear motion. Firstly the main motor outputs the force, and drives the flywheel and the gear, then runs through the crankshaft, connecting rod, etc to achieve the linear motion of the slider. There is a circular motion from the main motor to the connecting rod Door frame Power press

The transition point between circular motion and linear motion is between the connecting rod and the slider. Generally, there are two kinds of mechanisms here, one is a ball type and the other is a cylindrical type, which converts to the linear motion of the slider. The power press punches the material to deform it and obtain the required shape with high accuracy. Therefore, a set of dies (including upper and bottom dies) must be matched to place the material, and the machine is forced to deform it.

Main features of the sheet

1 With an inclinable cast structure, the machine body can incline to allow a punched workpiece or waste material to slide down from the die door frame punch.
2 With a rigid turn-key clutch, the press has single or continuous operation standards.
3 The punch press uses a single-type brake. The sliding block is equipped with a press-down type safety device that can be pressed down to protect the entire machine.
4 Avoid being damaged in case of overpressure.
5 The machine has the advantages of high universality, high precision, reliable performance, and convenient operation.

After Sales Service for the sheet punching machine
1. Warranty period is 12 months after receiving the machine; any quick-wear part is available for free during the guarantee period under proper operation, customers only need to pay for the freight of the replaced new parts.
2. Installation and training service is optional for customers, any client can ask for this service from HARSLE, and they should assume the airfare and accommodation for our engineer during the journey.